Find the Concentration of a Solution That Is Being Diluted
| simple dilution | serial dilution | VC=VC method | molar solutions | percent solutions |
|molar - % conversions | concentrated stock solutions (X units) | normality - molarity conversion
Working Concentration Calculations
1. Simple Dilution (Dilution Factor Method based on ratios)
A simple dilution is one in which a unit volume of a liquid material of interest is combined with an appropriate volume of a solvent liquid to achieve the desired concentration. The dilution factor is the total number of unit volumes in which your material will be dissolved. The diluted material must then be thoroughly mixed to achieve the true dilution. For example, a 1:5 dilution (verbalize as "1 to 5" dilution) entails combining 1 unit volume of solute (the material to be diluted) + 4 unit volumes of the solvent medium (hence, 1 + 4 = 5 = dilution factor). The dilution factor is frequently expressed using exponents: 1:5 would be 5e-1; 1:100 would be 10e-2, and so on.
Example 1: Frozen orange juice concentrate is usually diluted with 4 additional cans of cold water (the dilution solvent) giving a dilution factor of 5, i.e., the orange concentrate represents one unit volume to which you have added 4 more cans (same unit volumes) of water. So the orange concentrate is now distributed through 5 unit volumes. This would be called a 1:5 dilution, and the OJ is now 1/5 as concentrated as it was originally. So, in a simple dilution, add one less unit volume of solvent than the desired dilution factor value.
Example 2: Suppose you must prepare 400 ml of a disinfectant that requires 1:8 dilution from a concentrated stock solution with water. Divide the volume needed by the dilution factor (400 ml / 8 = 50 ml) to determine the unit volume. The dilution is then done as 50 ml concentrated disinfectant + 350 ml water.
Top of page
2. Serial Dilution
A serial dilution is simply a series of simple dilutions which amplifies the dilution factor quickly beginning with a small initial quantity of material (i.e., bacterial culture, a chemical, orange juice, etc.). The source of dilution material (solute) for each step comes from the diluted material of the previous dilution step. In a serial dilution the total dilution factor at any point is the product of the individual dilution factors in each step leading up to it.
Final dilution factor (DF) = DF 1 * DF 2 * DF 3 etc. Example: In a typical microbiology exercise the students perform a three step 1:100 serial dilution of a bacterial culture (see figure below) in the process of quantifying the number of viable bacteria in a culture (see figure below). Each step in this example uses a 1 ml total volume. The initial step combines 1 unit volume of bacterial culture (10 ul) with 99 unit volumes of broth (990 ul) = 1:100 dilution. In the second step, one unit volume of the 1:100 dilution is combined with 99 unit volumes of broth now yielding a total dilution of 1:100x100 = 1:10,000 dilution. Repeated again (the third step) the total dilution would be 1:100x10,000 = 1:1,000,000 total dilution. The concentration of bacteria is now one million times less than in the original sample.
Top of page
3. Making fixed volumes of specific concentrations from liquid reagents:
V 1 C 1 =V 2 C 2 Method Very often you will need to make a specific volume of known concentration from stock solutions, or perhaps due to limited availability of liquid materials (some chemicals are very expensive and are only sold and used in small quantities, e.g., micrograms), or to limit the amount of chemical waste. The formula below is a quick approach to calculating such dilutions where:
V = volume , C = concentration; in whatever units you are working. (stock solution attributes) V 1 C 1 =V 2 C 2 (new solution attributes) Example: Suppose you have 3 ml of a stock solution of 100 mg/ml ampicillin (= C 1 ) and you want to make 200 ul (= V 2 ) of solution having 25 mg/ ml (= C 2 ). You need to know what volume ( V 1 ) of the stock to use as part of the 200 ul total volume needed.
V 1 = the volume of stock you will start with. This is your unknown.
C 1 = 100 mg/ ml in the stock solution
V 2 = total volume needed at the new concentration = 200 ul = 0.2 ml
C 2 = the new concentration = 25 mg/ mlBy algebraic rearrangement:
V 1 = ( V 2 x C 2 ) / C 1
V 1 = (0.2 ml x 25 mg/ml) / 100 mg/ml
and after cancelling the units,
V 1 = 0.05 ml, or 50 ul
So, you would take 0.05 ml = 50 ul of stock solution and dilute it with 150 ul of solvent to get the 200 ul of
25 mg/ ml solution needed. Remember that the amount of solvent used is based upon the final volume needed, so you have to subtract the starting volume form the final to calculate it.Top of page
4. Moles and Molar solutions (unit = M = moles/L)
Sometimes it may be more efficient to use molarity when expressing chemical concentrations. A mole is defined as exactly 6.023 x 1023 atoms, or molecules, of a substance (this is called Avagadro's number, N). The mass of one mole of an element is its atomic mass (g) and is noted for each element in the periodic table. Molecular weight is the mass (g) of a substance based on the summed atomic masses of the elements in the chemical formula. Formula weight refers to chemicals for which no discrete molecules exist; for example, NaCl in solid form is made up of Na+ and Cl- ions, but there are no true molecules of NaCl. The formula weight of 1 mole NaCl would therefore be the sum of 1 atomic mass of each ion. The molecular weight (or FW) is provided as part of the information on the label of a chemical bottle. The number of moles in an arbitrary mass of an element or compound can be calculated as:
number of moles = weight (g)/ atomic (or molecular) weight (g)
Molarity (M) is the unit used to describe the number of moles of an element or compound in one liter (L) of solution (M = moles/L) and is thus a unit of concentration. By this definition, a 1.0 M solution is equivalent to one molecular weight (g/mole) of a compound brought up to 1 liter (1.0 L) volume with solvent (e.g., water) at a fixed temperature (liquids expand and contract with temperature and thus can change molarity).
Example 1: To prepare a liter of a molar solution from a dry reagent
Multiply the molecular weight (or FW) by the desired molarity to determine how many grams of reagent to use:
Suppose a compound's MW = 194.3 g/mole;
to make 0.15 M solution use 194.3 g/mole * 0.15 moles/L = 29.145 g/L
You would dissolve the specified mass of reagent in a fraction of the total volume of solvent (at STP) and then raise the volume to exactly one liter by adding additional solvent and mixing thoroughly.
Example 2: To prepare a specific volume of a specific molar solution from a dry reagent
A chemical has a FW of 180 g/mole and you need 25 ml (0.025 L) of 0.15 M (M = moles/L) solution. How many grams of the chemical are needed to make this solution?
#grams/desired volume (L) = desired molarity (mole/L) * FW (g/mole)
by algrebraic rearrangement,
#grams = desired volume (L) * desired molarity (mole/L) * FW (g/mole) #grams = 0.025 L * 0.15 mole/L * 180 g/mole
after cancelling the units,
#grams = 0.675 g
So, you need 0.675 g/25 ml
Solutions Containing Multiple Reagents
Complex solutions such as buffers, salines, fixatives, etc., may be comprised of multiple chemical reagents. In preparation of these solutions, each reagent is dealt with separately in determining how much to use to make the final solution. For each, the volume used in the calculations is the final volume of solution needed.
More examples of worked problems: About.com: Chemistry
Top of page5. Percent Solutions (% = parts per hundred or grams/100 ml)
Many reagents are mixed aspercent solutions eitheras weight per volume (w/v) when starting with dry reagents OR volume per volume (v/v) when starting with liquid reagents. When preparing solutions from dry reagents, the same mass of any reagent is used to make a given percent concentration although the molar concentrations would be different.
In general,
Weight percent (w/v) = [mass of solute (g)/ volume of solution (ml)] x 100, and,
Volume percent (v/v) = [volume of solute (ml)/ volume of solution (ml)] x 100
For example, a 100 ml of 10% solution of any dry reagent would contain 10 g dry reagent in a final volume of 100 ml. A 10% (v/v) solution would contain 10 ml solute/ 100 ml solution volume.
Example 1: If you want to make 200 ml of 3 % NaCl you would need 0.03 g/ml x 200 ml = 6.0 g NaCl in 200 ml water.
When using liquid reagents the percent concentration is based upon volume per volume, and is similarly calculated as % concentration x volume needed = volume of reagent to use.
Example 2: If you want to make 2 L of 70% ethanol from 100% ethanol you would mix 0.70 ml/ml x 2000 ml = 1400 ml ethanol with 600 ml water.
To convert from % solution to molarity , multiply the % solution by 10 to express the percent solution grams/L, then divide by the formula weight.
Molarity = (grams reagent/100 ml) * 10
xxxxxxxxxx FWExample 1 : Convert a 6.5 % solution of a chemical with FW = 325.6 to molarity,
[(6.5 g/100 ml) * 10] / 325.6 g/mole = [65 g/L] / 325.6g/mole = 0.1996 M To convert from molarity to percent solution , multiply the molarity by the FW and divide by 10:
% solution = molarity * FW
xxxxxxxxxx 10Example 2: Convert a 0.0045 M solution of a chemical having FW 178.7 to percent solution:
[0.0045 moles/L * 178.7 g/mole] / 10 = 0.08 % solution Top of page
6. Concentrated stock solutions - using "X" units
Stock solutions of stable compounds are routinely maintained in labs as more concentrated solutions that can be diluted to working strength when used in typical applications. The usual working concentration is denoted as 1x. A solution 20 times more concentrated would be denoted as 20x and would require a 1:20 dilution to restore the typical working concentration.
Example : A 1x solution of a compound has a molar concentration of 0.05 M for its typical use in a lab procedure. A 20x stock would be prepared at a concentration of 20*0.05 M = 1.0 M. A 30X stock would be 30*0.05 M = 1.5 M.
7. Normality (N): Conversion to Molarity
Normality = n*M where n = number of protons (H+) in a molecule of the acid.
Example : In the formula for concentrated sulfuric (36 N H2SO4), there are two protons, so, its molarity= N/2. So, 36N H2SO4 = 36/2 = 18 M.
Modified 9-27-12 gaDepartment of Biology , Bates College, Lewiston, ME 04240
Find the Concentration of a Solution That Is Being Diluted
Source: http://abacus.bates.edu/~ganderso/biology/resources/dilutions.html